SED1330F中文資料ETC數(shù)據(jù)手冊(cè)PDF規(guī)格書

■ DESCRIPTION

The SED1330 is a CMOS low-power dot matrix liquid crystal graphic display controller. The device stores in external RAM display data sent by an 8-bit microcomputer, and generates all the signals required by the LCD drivers. The LSI incorporates an internal character generator ROM which supports user-defined characters (also an external CGROM can be supported).

The SED1330 can be interfaced to high-speed microprocessors such as the Intel family or Motorola family. The controller supports a set of rich commands that will allow the user to create a layered display of characters and graphics.

Also, the controller functions as a pipeline buffer between the MPU and display memory so that low-cost, medium-speed SRAM can be used.

■ FEATURES

? CMOS low-power graphic and character display controller

? Selectable MPU interface is compatible with both the Intel family and the Motorola family

? Smooth scrolling support:

Horizontal and vertical scroll

Scrolling of selected areas of the display

? Multimode display:

2 layers of overlapping character and graphics

3 layers of overlapping graphics

? Selectable display synthesis:

Inverse video

Flashing display, cursor on/off/blink

Under and bar cursor, block cursor

Simple animation

? Programmable cursor

? Internal character generator ROM

? Supports external character generator ROM:

8 × 8 or 8 × 16 pixel characters

Allows mixing of ROM and RAM character sets

? Supports 64K bytes of memory: 2 of 32K × 8 100ns SRAM or 8 of 8K × 8 100ns SRAM

? Display duty .................................. 1/2 to 1/256

? Low power dissipation ................ 5mA (typical)

0.05μA (typical), standby

? Logic power supply ........................ 4.5 to 5.5V

? Package ................Plastic QFP5-60 pin (FBA)

Plastic QFP6-60 pin (FBB)